Configuring Dhcp Client Connection - Nisuta NS-WIR150N Instruction Manual

WLAN AP ROUTER 802.11N

Configuring DHCP Client connection

Dynamic Host Configuration Protocol (DHCP), Dynamic IP (Get
WAN IP Address automatically). If you are connected to the
Internet through a Cable modem line, then a dynamic IP will be
assigned.
If your ISP wants you to connect to the Internet using DHCP
Client, follow the instructions below.
1. From the left-hand Network Settings -> WAN Interface
menu. The following page is displayed:
2. From the WAN Access Type drop-down list, select DHCP
Client setting.
3. Click Apply Changes.
140