L2Tp - Nisuta NS-WIR150N Instruction Manual

WLAN AP ROUTER 802.11N

L2TP

In this mode, the device is supposed to connect to internet via
ADSL/Cable Modem. The NAT is enabled and PCs in four LAN
ports share the same IP to ISP through WAN port. The
connection type can be setup in WAN page by using static IP.
1. From the WAN Access Type drop-down list, select L2TP
setting determined by your Network Administrator or ISP.
2. Enter Server IP Address for example 172.1.1.1 determined
by your Network Administrator or ISP.
3. Enter User Name for example 1234 determined by your
Network Administrator or ISP.
4. Enter Password for example 1234 determined by your
Network Administrator or ISP.
5. Click Next>>.
53