Nisuta NS-WIR150N Instruction Manual page 11

WLAN AP ROUTER 802.11N
Label Function
ANTENNA ANTENNA
ON/OFF Power on/off the device
SWITCH
POWER Connects to the supplied power cable
Connects the device via Ethernet to up to four PCs on
LAN 4/3/2/1
your LAN
WAN Connects the device via Ethernet to xDSL / Cable
Modem
WLAN Press this button for at least two full second to turn
off/on wireless signals
Press this button for at least three full seconds
WPS
and the WPS LED will flash to start WPS.
Now go to the wireless adapter or device and
press its WPS button. Make sure to press the
button within 120 seconds (2 minutes) after
pressing the router's WPS button.
If you are using a Wireless adapter connected to
a computer, a "WPS Authentication" screen will
appear. Wait until the screen says
"Authentication succeeded." This may take a few
minutes.
RESET Reset button. RESET the 802.11n WLAN router to its
default settings.
Press this button for at least 6 full seconds to start to
reset it to its default settings.
11