Wan Interface Setup - Nisuta NS-WIR150N Instruction Manual

WLAN AP ROUTER 802.11N

WAN Interface Setup

This page is used to configure the parameters for Internet
network which connects to the WAN port of your Access Point.
Here you may change the access method to static IP, DHCP, or
PPPoE by click the item value of WAN Access type.
To change the WAN Access Type:
3. From the WAN Access Type drop-down list, select Static IP,
DHCP Client, PPPoE, PPTP, or L2TP setting determined
by your Network Administrator or ISP.
4. Click Next>>.
48