Towel Sleeve; Refill Water During Operation; Completion And Storage - Piranha YQ-3888 User Manual

Table of Contents

Advertisement

10.4 Towel Sleeve

• First install the Accessory Spray Attachment onto the Short Spray Nozzle.
• Take the Towel Sleeve and stretch it over the bottom face of the Accessory Spray
Attachment until it fits neatly.
• To remove the Towel Sleeve, gently pull the side down and the pull off.

11 Refill Water During Operation

• Unplug the power cord and disconnect from the power supply.
• Press the steam button to release the pressure until there is no more steam.
• Slowly unscrew the safety screw cap but do not remove it as there may be a short burst of
residual steam escaping first.
• Allow the appliance to cool it down for about 10 minutes. Finally, completely remove the
safety screw cap. Caution must be taken as the unit will still be very hot.
• Use the funnel and measuring cup to refill as described in the Operation Procedure
section of this manual.
• Re-fit the safety screw cap as described in the Operation Procedure section of this
manual.

12 Completion and Storage

• After you have finished using the appliance, unplug the power cord and disconnect from
the power supply.
• Press the steam button to release the pressure until there is no more steam.
• Slowly unscrew the safety screw cap but do not remove it as there may be a short burst of
residual steam escaping first.
• Allow the appliance to cool it down for about 10 minutes. Finally, completely remove the
safety screw cap.
• Empty the residual water in the tank and clean the external surface with a piece of dry
cloth.
Note: Burns can occur from touching hot parts, hot water or steam. Be cautious
when you turn this appliance upside down to empty the water as the water in the
tank may still be hot.
• Re-fit the safety screw cap as described in the Operation Procedure section of this
manual.
• Store the appliance safely and in a dry place.
Do Not wind the power cord around the appliance body as this will damage the cord over
time. Simply loop the cable and place next to the appliance
Page 12 of 14

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents