Installation Of Accessories; Round Brush Or Bent Spray Nozzle; Long Spray Nozzle & Flexible Extension Spray Nozzle; Accessory Spray Attachment For Cleaning Windows - Piranha YQ-3888 User Manual

10 Installation of Accessories

10.1 Round Brush or Bent Spray Nozzle

• For direct installation onto the Short Spray Nozzle, position the Bent
Spray Nozzle or the Round Brush over the tip of the Short Spray
Nozzle, as shown, and push either the Bent Spray Nozzle or the
Round Brush all the way onto the Short Spray Nozzle until it is in
position.
• The Short Spray Nozzle has six sides which means the Bent Spray
Nozzle or the Round Brush can be positioned at six different angles
depending on the application.
• Installing the Bent Spray Nozzle or the Round Brush to either the
Long Spray Nozzle or the Flexible Extension Spray Nozzle, is the
same procedure.
10.2 Long Spray Nozzle & Flexible Extension Spray Nozzle
• Hold the outer section of the Long Spray Nozzle and push it onto the
Short Spray Nozzle aligning the arrow on the Long Spray Nozzle
collar with the single-line marked on the front top of the appliance
body.
• Push the Long Spray Nozzle all the way on then rotate the Long
Spray Nozzle in the arrow direction shown on the Long Spray
Nozzle collar until the arrow aligns with the double-line marked on the
front side of the appliance body.
• Installation of the Flexible Extension Spray Nozzle is carried out
with the same procedure.
• To remove the Long Spray Nozzle or the Flexible Extension Spray Nozzle, reverse the
procedure above.

10.3 Accessory Spray Attachment for Cleaning Windows.

• First install the Accessory Spray Attachment onto the Short Spray Nozzle.
• Take the Squeegee Plate and locate the two small hooks into the two suspension lugs on
the back of the Accessory Spray Attachment and then swing the Squeegee Plate up
and lock the hook over the Accessory Spray Attachment body.
• To remove the Squeegee Plate, pull the hook back to release the plate then unhook from
the lugs.
Page 11 of 14