Radio Operation; Compact Disc Player Operation - Sanyo DC-AX20 Instruction Manual

1. Switch ON the unit.
2. Slide the FUNCTION selector to RADIO position.
3. Slide BAND selector to select the desired band.
4. Turn the TUNING knob to select the desired broadcasting station.
˙FM STEREO indicator will light up when received a stereo signal in FM STEREO mode.
Extend the FM Antenna Wire at rear cabinet for best reception.
˙Move and rotate the system for improve AM reception.
Caution: Do not connect FM Antenna Wire to an external source.
5. Adjust VOLUME control to a comfortable sound level.
6. Press and release POWER ON / OFF button to switch OFF unit.
Loading Compact Disc
˙Press CD door Open button to open CD door .
˙Load a disc with label side upward with push down the CD door to close.
Playing Compact Disc
1. Switch ON the unit.
2. Slide FUNCTION selector to CD position.
3. Load a disc into the CD compartment and close the CD door. After the CD Player read TOC then
press CD PLAY / PAUSE Button to start playback.
4. Press STOP
5. Press down and release POWER ON / OFF button to switch OFF unit.
NOTE: If no disc or damaged disc loaded, the LCD display will show as below Fig. 1a.
If loaded disc contains 18 tracks, the LCD display will show as below Fig. 1b.
Fig. 1a
/ PLAY / PAUSE button
START: Press once after loaded CD disc.
SUSPEND: Press once during playback and the current playing track will be blinking on the LCD
Display as above Fig. 2.
RESUME: Press once during pause, continuous playback and the current track stop blinking on
the LCD Display.

RADIO OPERATION

COMPACT DISC PLAYER OPERATION

button to stop playback.
Fig.1b Fig. 2
6