Random Auto Restart Control - Panasonic CS-W18CKP Service Manual

CS-W18CKP CU-W18CKP5 / CS-W24CKP CU-W24CKP5
8.5. Sleep Mode Auto Operation
Cooling or Soft Dry Operation
Purpose is to obtain a comfortable room temperature while
sleeping. When you press the SLEEP Mode, the following
movement will start to avoid overcooling.
• Sleep shift operation starts, when the room temperature
reaches the setting temperature or after 1 hour of operation.
• The setting temperature will be risen by 0.5°C at the start of
operation and by 0.5°C one hour later .
• The airflow volume will automatically change to Lo fan
speed.
• Sleep Mode operation time is 8 hours, the operation will be
stop after 8 hour.
• When used together with the Timer, the Timer has priority.
Heating Operation
Purpose is to obtain a comfortable room temperature while
sleeping. When you press the SLEEP Mode, the following
movement will start to avoid overheating.
• Sleep shift operation starts, when the room temperature
reaches the setting temperature or after 1 hour of operation.
• The setting temperature will be decrease by 2°C at the start
of operation and by 3°C one hour later.
• The fan speed refer to Indoor Fan Motor Control.
• Sleep Mode operation time is 8 hours, the operation will be
stop after 8 hour.
• When used together with the Timer, the Timer has priority.
8.6.

Random Auto Restart Control

• If there is a power failure, operation will be automatically restarted after 3 to 4 minutes when the power is resumed.
It will start with previous operation mode and airflow direction.
• Restart time is decided randomly using 4 parameter:-
Intake air temperature, setting temperature, fan speed and Air Swing Blade position.
• Auto Restart Control is not available when Timer or Sleep Mode is set.
• This control can be omitted by open the circuit of JX2. (Refer Circuit Diagram)
24