Table of Contents
Advertisement
2
Installation
Hardware Installation
The adapter must be used in a 32-bit PCI slot that supports
PCI local bus Mastering. The card settings, such as Interrupt
and I/O address, are automatically configured by the PC BIOS
without user's intervention.
Currently, the Pentium/486 motherboards provide as many as
three PCI slots. Each slot has a pre-assigned Interrupt and I/O
address via the PC BIOS. Therefore, while you insert the card
into a PCI Bus Master slot, the PC BIOS will automatically
assign unique address for the network card. In certain
computers, however, you have to modify your BIOS by
entering the CMOS SETUP utility.
Advertisement
Table of Contents
