Download Print this page
D-Link dwl-120+ Quick Installation Manual
Hide thumbs Also See for dwl-120+:

Advertisement

This product works with the following operating
Windows XP, Windows
system software:
2000, Windows Me, Windows 98se
Before You Begin
Before You Begin
Before You Begin
Before You Begin
Before You Begin
You must have at least the following:
You will need a computer with an available USB port to connect the
DWL-120+ Wireless USB adapter.
At least a 300 MHz processor and 32 MB of memory
An 802.11b Access Point (for Infrastructure Mode) or another 802.11b
wireless adapter (for Ad-Hoc; Peer-to-Peer networking mode.)
Properly Installed and Working USB Controller.
Check Your Package Contents
Check Your Package Contents
Check Your Package Contents
Check Your Package Contents
Check Your Package Contents
These are the items included with your DWL-120+ purchase:
If any of the above items are missing, please contact your reseller.
©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and
specifications subject to change without notice. 1G-BDWL-120+ 04082003
DWL-120+ Wireless USB Adapter
CD-ROM (containing Drivers, Manual and Warranty)
Mini-USB Cable
DWL-120+
2.4GHz USB
Wireless Adapter

Advertisement

loading

Summary of Contents for D-Link dwl-120+

  • Page 1 If any of the above items are missing, please contact your reseller. ©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. 1G-BDWL-120+ 04082003...
  • Page 2 Insert the D-Link CD-ROM Insert the D-Link CD-ROM Into Your Into Your Insert the D-Link CD-ROM Insert the D-Link CD-ROM Insert the D-Link CD-ROM Into Your Into Your Into Your Computer Computer Computer Computer Computer install Turn on the computer...
  • Page 3: Your Computer

    Click Next Click No, I will restart my computer later Click Finish Shut down Your Computer Antenna Link/Power LED Used to wirelessly Link - Blinks when data is being connect to 802.11b transmitted through the wireless networks. connection. Power - Indicates that the DWL- 120+ is properly installed in the computer.
  • Page 4: Restart Your Computer

    Installing the DWL-120+ Wireless USB Installing the DWL-120+ Wireless USB Installing the DWL-120+ Wireless USB Installing the DWL-120+ Wireless USB Installing the DWL-120+ Wireless USB Adapter to Your Computer Adapter to Your Computer Adapter to Your Computer Adapter to Your Computer Adapter to Your Computer Make sure to turn off your computer.
  • Page 5 Windows XP will automatically load the driver files. Click Finish For Windows XP/2000, a screen similar to this Digital Signature Not Found screen may appear during the installa- tion. Click to continue the installation For Windows Me and 98SE, this screen may appear.
  • Page 6 Your Installation is Complete! After you’ve continued in Windows XP (or after the computer restarts in the other Windows operating systems), the D-Link Air DWL-120+ Configuration Utility will automatically start and the utility icon will appear in the bottom right hand corner of the desktop screen (systray).
  • Page 7 Your Installation is Complete!(cont.) Your Installation is Complete!(cont.) Your Installation is Complete!(cont.) Your Installation is Complete!(cont.) Your Installation is Complete!(cont.) Uncheck “Use Windows to configure my wireless net- work settings.” Click...
  • Page 8 Appendix Appendix Appendix Appendix Appendix Using the Configuration Utility Using the Configuration Utility Using the Configuration Utility Using the Configuration Utility Using the Configuration Utility Status: Displays the SSID The Service Set MAC Address of the Identifier is the name Access Point that is assigned to the wireless associated with the...
  • Page 9 Ad-Hoc. TxRate: You can Power Mode: Preamble: By default, D-Link adjust the transmis- default, Power Mode is AirPlus Products are set to Long sion rate to get the set to Continuous Preamble. The Preamble best signal possible Access Mode.
  • Page 10: Ip Address Configuration

    IP Address Configuration IP Address Configuration IP Address Configuration IP Address Configuration IP Address Configuration To connect to a network, make sure the proper network settings are configured for DWL-120+. Microsoft Windows XP: Go to Start > right click on My Network Places >...
  • Page 11: For Windows 2000 Users

    For Windows 2000 users: Go to Start > Settings > Network and Dial-up Connections > Double-click on Local Area Connection associated with the DWL-120+ > select Properties Click Internet Protocol (TCP/IP) Click Properties Dynamic IP address setup Used when a DHCP server is available on the local network.