Troubleshooting - HAMPTON BAY PG171H-B Use And Care Manual

Care and Maintenance
STORAGE
□ Between uses or during periods of extended inactivity:
Turn control knob to the "OFF" position.
Disconnect the LP cylinder and move to a secure, well-ventilated location outdoors.
Store the heater upright in an area sheltered from direct contact with inclement weather (such as rain, sleet, hail,
snow, dust and debris).
NOTE:
Never leave LP gas tank exposed to direct
sunlight or excessive heat.
If desired, use cover (s) to protect the heater and
help prevent buildup in air passages.
CAUTION:
THD Wait until heater is cool before covering.

Troubleshooting

PROBLEM POSSIBLE CAUSE
The burner does 1. The gas pressure is low.
not light. 2. The orifice is blocked.
3. The control knob is not in the "ON"
The burner flame 1. The gas pressure is low.
is low. 2. The control knob is not positioned at
3. The burner jet is partially blocked.
4. Outdoor temperature is less than 40° F and
5. The supply hose is bent or kinked.
There is carbon
build up.
There is thick
black smoke.
position.
"High".
tank is less than 1/4 full.
Seasonal accumulation.
There is blockage in the burner.
CORRECTIVE ACTION
1. Turn the gas cylinder valve "OFF" and
replace the cylinder.
2. Clear the blockage.
3. Turn the control knob to the "ON" position.
1. Turn the gas cylinder valve "OFF" and
replace the cylinder.
2. Position the control knob to the "HIGH"
position.
3. Clear blockage.
4. Use a full gas cylinder.
5. Straighten the hose.
Wipe off before lighting.
Remove blockage and clean the burner inside
and outside.
15
Please contact 855-HD-HAMPTON for further assistance.
HAMPTONBAY.COM