Advertisement
USE AND CARE GUIDE
THD PRODUCT NAME: STAINLESS STEEL GAS PATIO HEATER
Questions, problems, missing parts? Before returning to the store,
8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
DANGER
FOR YOUR SAFETY: If you smell gas:
1. Shut off gas to the appliance.
If odor continues, keep away from the
appliance and immediately call your gas
supplier or fire department.
DANGER
DANGER indicates an imminently hazardous
situation which, if not avoided, will result in
death or serious injury.
DANGER
Failure to comply with the precautions and
instructions provided with this heater can
result in death, serious bodily injury and
property loss or damage from hazards of fire,
explosion, burn, asphyxiation, and/or carbon
monoxide poisoning. Only persons who can
understand and follow the instructions should
use or service this heater.
call Hampton Bay Customer Service
1-855-HD-HAMPTON
HAMPTONBAY.COM
THANK YOU
Item # 1005793859
Model #PH01-SS
WARNING
Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any
other appliance. An LP cylinder not connected for
use shall not be stored in the vicinity of this or
any other appliance.
WARNING
Improper installation, adjustment, alteration,
service or maintenance can cause property
damage, injury or death. Read the installation,
operation and maintenance instructions
thoroughly before installing or servicing this
equipment.
WARNING
FOR OUTDOOR USE ONLY!
ATTENTION
If your patio heater model is equipped with a base
weight/sand box, it is strongly recommended that
you fill it with sand or fine gravel and attach it
securely to the bottom of the heater. In windy
conditions, store the heater in a protected area or
otherwise secure it. Unsecured heaters can be
blown over in moderate to high wind. Damage
due to weather or acts of God is not covered
under warranty.
Advertisement
Table of Contents
Related Manuals for HAMPTON BAY PH01-SS
Summary of Contents for HAMPTON BAY PH01-SS
- Page 1 God is not covered under warranty. Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM...
- Page 2 SAFETY INFORM TABLE OF CONTENTS Before You Begin Page 2 Safety Information Page 3 Package Contents Page 4 Hardware Contents Page 4 Assembly Page 5-8 Operating Instructions Page 9-12 Care and Maintenance Page 13 Troubleshooting Page 14 Warranty Information Page 15 BEFORE YOU BEGIN 8 a.m.
- Page 3 SAFETY INFORM DANGER DANGER WARNING indicates an imminently This product is fueled by propane gas. CARBON MONOXIDE HAZARD hazardous situation which, if not avoided, Propane gas is invisible, odorless, and This heater is a combustion appliance. will death or serious injury. All combustion appliances produce carbon help detect leaks and can be described as monoxide (CO) during the combustion...
- Page 4 CONTENTS Item Desc rip REFLECTOR BURNER ASSEMBLY TANK HOUSING POST SUPPORT SUPPORT LEGS BASE REGULATOR WHEEL Item Descrip REMARK M6x10 Screw Pack separately 6pcs pack separately 2pcs assembled into M8 Bolt wheel Pack separately Pack separately l l a assembled into wheel HARDWARE CONTENTS HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
- Page 5 ASSEMBLY INSTRUCTIONS PREPARATION Before beginning assembly of this appliance, make sure all parts are present. Compare all parts with package contents list and hardware contents as listed on page 4 of this manual. If any part is missing or damaged, do not attempt to assemble this product.
- Page 6 ASSEMBLY INSTRUCTIONS Attach the post support to the top of the support legs using 6 pcs M6x22 bolts and 6 pcs M6 nuts Place the tank housing on top of the assembly. Screw one end of the reflector sutds into the top holes of top holes of the burner assembly HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
- Page 7 ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS Unscrew the four bolts that are pre-assembled on the burner assembly Insert the regulator from the top end of the post support to the post support , using the four bolts re-moved at the beginning of this step. TE R IG NI reflector.
- Page 8 ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS Attach the reflector to the top of the reflector stud on the burner assembly using 6 pcs washers and 3 pcs wing unts Turn the cylinder valve on the tank cloctwise to close the propane tank. Attach the regulator to the cylinder valve by turning the regulator coupling nut clockwise.
-
Page 9: Operation
OPERATION A minimum supply pressure of .5 psi is required for the purpose of input adjustment of propane gas. Storage of an appliance indoors is permissible • Do not store a spare LP-gas only if the cylinder is disconnected and removed from the appliance. A cylinder cylinder under or near this must be stored outdoors in a well-ventilated area out of the reach of children. -
Page 10: Before Lighting
OPERATION LEAK TEST WARNING 1. Make 2-3 oz. of leak test solution BEFORE TURNING GAS SUPPLY ON: Perform all leak tests outdoors. 1. Your heater was designed and detergent and three parts water). NEVER leak test when smoking approved for OUTDOOR use Do not use heater until all connections 2. - Page 11 OPERATION LIGHTING WARNING NOTE: For initial start or after any cylinder FOR YOUR SAFETY change, hold the control knob in for 2 Be careful when attempting to manually minutes to purge air from all gas lines PUSH IN ignite this heater. Holding in the control knob for more than 10 seconds before before proceeding.
-
Page 12: Operation Checklist
OPERATION OPERATION CHECKLIST: WARNING For a safe and heating experience, perform this check before each use: FOR YOUR SAFETY Heater will be hot after use. Handle with extreme care. BEFORE OPERATING: I am familiar with entire owner’s manual and understand all precautions noted. -
Page 13: Maintenance
MAINTENANCE To enjoy years of outstanding performance from your heater, make sure you WARNING perform the following maintenance activities on a regular basis: FOR YOUR SAFETY • Do NOT touch or move heater for at least KEEP EXTERIOR SURFACES CLEAN. 45 minutes after use. -
Page 14: Troubleshooting
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION Gas valve may be off Turn gas valve ON Fuel tank may be empty Purge air from lines pen gas lines and depress control knob Air in supply system for 2-3 minutes. Loose connection Main burner will Igniter fails Use stick lighter to manually light... - Page 15 Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.