•
Scan provides an alternative to the trigger buttons on the terminal.
•
View displays the bar code content in a separate screen.
•
Params is used to change scanning parameter options, such as:
•
beep time (length of decode beep)
•
beeper frequency (tone)
•
LED-on time (length of time LED remains on upon decode)
•
Code ID (AIM, Symbol)
•
Wav File (sound of decode beep).
•
Codes selects the code types the terminal is able to decode, and sets the options
for each code type.
•
Cancel closes the Scan screen.
HTML Scan Demo
The HTML Scan demo provides the HTML application ScanBrowse. You may also use this
application to turn the Scan Wedge in ScanBrowse on and off. To access the demo, tap
HTML Scan on the main demo screen.
Figure B-3. HTML Scan Demo Screen
Additional Programs
B-5
Need help?
Do you have a question about the PDT 8000 and is the answer not in the manual?