Pure Bridge - D-Link DSL-G804V Quick Installation Manual

Configuring the Router (continued)

Pure Bridge

Bridge is used to set the Bridge mode for the Router. The VPI number and VCI
number should not be changed unless you have been instructed by ISP to change
them. Select the Encapsulation used for encapsulation specific to your service. Click
Next when you are ready to continue to the Setup Completed menu.If you are not sure
what Connection Type, VPI and VCI to use, please check with your ISP.
Type the
VCI, if these
values are not
correct, check
with your ISP for
information.
Next, you will see the Set Wireless connection Screen.
VPI and
Click the Next
11
Select the
Encapsulation Type
as LLC Bridged
VcMux Bridged
instructed by your ISP.
button.
or
as