D-Link DSL-G804V Quick Installation Manual page 9

Configuring the Router (continued)
PPPoE/PPPoA Connections
Type in the Username and Password used to identify and verify your account to the
ISP. The VPI number and VCI number should not be changed unless you have been
instructed by ISP to change them. Select the Connection Type used for
encapsulation specific to your service. Click Next when you are ready to continue to
the Setup Completed menu. If you are not sure what Connection Type, VPI and VCI
to use, please check with your ISP.
Use the pull-
down menu to
choose the
correct
Connection
Type. The user
may choose
between PPPoE
or PPPoA, as
instructed by
your ISP.
Type
Username
Password
your ISP
account.
the
and
for
Type
WAN IP
Address, Primary DNS
Address
DNS
Click the Next
9
Type the VPI and
VCI, if these
values are not
correct, check
with your ISP for
information.
the IP addresses for the
Address, Subnet
Mask, ISP Gateway
and/or Secondary
Address, as instructed
by your ISP.
button.