D-Link DSL-G804V Quick Installation Manual page 10

Configuring the Router (continued)
MPoA/IPoA
For this connection type, the user may choose MPoA or IPoA. The VPI number and
VCI number should not be changed unless you have been instructed by ISP to change
them. Select the Connection Type used for encapsulation specific to your service.
Click Next when you are ready to continue to the Setup Completed menu.If you are
not sure what Connection Type, VPI and VCI to use, please check with your ISP.
Use the pull-
down menu to
choose the
Type the VPI and
correct
VCI, if these
Connection
values are not
Type. The user
correct, check
may choose
with your ISP for
between MPoA
information.
or IPoA, as
instructed by
Type the IP addresses for the
your ISP.
WAN IP Address, Subnet
Mask, ISP Gateway
Address, Primary DNS
Address and/or Secondary
DNS Address, as instructed
by your ISP.
Click the Next button.
10