Brother MFC-790CW Quick Setup Manual page 5

WARNING
Since the machine is grounded through the
power outlet, you can protect yourself from
potentially hazardous electrical conditions on
the telephone network by keeping the power
cord connected to your machine when you
connect it to a telephone line. Similarly, you
can protect yourself when you want to move
your machine by disconnecting the telephone
line first and then the power cord.
Important
The telephone line cord MUST be connected
to the socket on the machine marked LINE.
Note
If you are sharing one telephone line with an
external telephone, connect it as shown below.
1 Extension telephone
2 External telephone
Note
If you are sharing one telephone line with an
external telephone answering machine, connect it
as shown below.
5
If ink gets in your eyes, wash them out with
water at once, and if irritation occurs consult a
doctor.
a
1
2
b
c
Note
Do not throw away the green protective part.
You will need it if you transport the machine.
d
Set the receive mode to Manual if you have
an external answering machine. See
Choose a Receive Mode on page 8. For
additional details, see Connecting an
external TAD (telephone answering device)
in Chapter 7 of the User's Guide.
Install the ink cartridges
WARNING
Make sure that the power is turned on.
The LCD shows:
No Cartridge
Install Ink
Black
BK
Cyan
C
Open the ink cartridge cover a.
Remove the green protective part a.
Unpack the ink cartridge.
Yellow
Y
Magenta
M
1
1
5