Replacing The Tail/Brake Light Bulb - Yamaha grizzly 700 Owner's Manual

To raise a headlight beam, turn the headlight beam
adjusting screw in direction (a).
To lower a headlight beam, turn the adjusting
screw in direction (b).
1. Headlight beam adjusting screw
8
EBU25642

Replacing the tail/brake light bulb

If the tail/brake light bulb burns out, replace it as
follows.
1. Remove panel I. (See page 8-10.)
2. Remove the tail/brake light bulb holder (to-
gether with the bulb) by turning it counter-
clockwise.
1. Tail/brake light bulb holder
3. Remove the burnt-out bulb by pushing it in
and turning it counterclockwise.
1. Tail/brake light bulb
8-63