V-Belt Case Drain Plug; Adjusting The Throttle Cable Free Play - Yamaha grizzly 700 Owner's Manual

Tightening torque:
Purging bolt:
27 Nm (2.7 m·kgf, 20 ft·lbf)
EWB02380
WARNING
Never run the engine in an enclosed area when
purging the spark arrester, otherwise it could
cause injury to the eyes, burns, carbon monox-
ide poisoning, possibly leading to death, and
start a fire.
G Always let the exhaust system cool prior to
touching exhaust components.
G
Always wear eye protection, and make sure
no one is behind the ATV.
G
Make sure there are no combustible materi-
als in the area.
EBU23930

V-belt case drain plug

After riding in water deep enough to allow it to en-
ter the V-belt case, remove this plug to drain the
water from the case.
TIP
If water drains from the V-belt case after removing
the plug, have a Yamaha dealer check the ATV as
the water may affect other engine parts.
1. V-belt case drain plug
EBU29700

Adjusting the throttle cable free play

The throttle cable free play should be checked
and, if necessary, adjusted at the intervals speci-
fied in the periodic maintenance and lubrication
chart.
8-44
8