Adjusting The Brake Pedal Free Play - Yamaha grizzly 700 Owner's Manual

Hide thumbs Also See for grizzly 700:
Table of Contents

Advertisement

EBU29072

Adjusting the brake pedal free play

The brake pedal free play must be adjusted at the
intervals specified in the periodic maintenance and
lubrication chart.
TIP
G
Always perform this maintenance completely in
the following order whenever adjusting the rear
brake.
G
Before adjusting the brake pedal free play,
check the rear brake pads for wear.
The brake pedal free play should measure 0.0–5.0
mm (0.00–0.20 in) as shown. If the free play is in-
correct, adjust it as follows.
1. Brake pedal free play
1. Remove panel H. (See page 8-10.)
2. Loosen the locknut.
3. Turn the brake pedal free play adjusting nut in
direction (a) to increase the free play, and in
direction (b) to decrease it.
8-50
8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents