Removing A Wheel; Installing A Wheel - Yamaha grizzly 700 Owner's Manual

4. Insert a new bulb into the bulb holder, push it
in, and then turn it clockwise until it stops.
5. Install the bulb holder (together with the bulb)
by turning it clockwise.
6. Install the panel.
EBU25651

Removing a wheel

1. Place the ATV on a level surface.
2. Loosen the wheel nuts.
1. Wheel nut
3. Elevate the ATV and place a suitable stand
under the frame.
4. Remove the nuts from the wheel.
5. Remove the wheel.
EBU25701

Installing a wheel

1. Place the ATV on a level surface.
2. Install the wheel and the nuts.
TIP
G The arrow mark
the rotating direction of the wheel.
G
Tapered nuts are used for both the front and rear
wheels. Install the nuts with their tapered side to-
wards the wheel.
1. Arrow mark
8-64
on the tire must point toward
1
8