Use Keywords To Block Internet Sites - NETGEAR Nighthawk X4S User Manual

You must select this check box before you can specify an access rule and use the Allow and Block buttons.
When this check box is cleared, all devices are allowed to connect, even if a device is in the blocked list.
6. Select an access rule:
• Allow all new devices to connect. With this setting, if you add a new device, it can access your network.
You don't need to enter its MAC address on this page. We recommend that you leave this radio button
selected.
• Block all new devices from connecting. With this setting, if you add a new device, before it can access
your network, you must enter its MAC address for an Ethernet connection and its MAC address for a WiFi
connection in the allowed list.
The access rule does not affect previously blocked or allowed devices. It applies only to devices joining your
network in the future after you apply these settings.
7. To view allowed or blocked devices that are not connected, click one of the following links:
• View list of allowed devices not currently connected to the network
• View list of blocked devices not currently connected to the network
The list displays.
8. To allow the computer or device you're currently using to continue to access the network, select the check box
next to your computer or device, and click the Allow button.
9. Click the Apply button.
Your settings are saved.

Use Keywords to Block Internet Sites

You can use keywords to block certain Internet sites from your network. You can use blocking all the time or based
on a schedule.
To block Internet sites:
1. Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and password are case-sensitive.
The BASIC Home page displays.
Nighthawk X4S AC2600 Smart WiFi Router
Control Access to the Internet
48