Use A Vpn Tunnel On Your Windows Computer - NETGEAR Nighthawk X4S User Manual

4. Select ADVANCED > Advanced Setup > VPN Service.
The VPN Service page displays.
5. Make sure that the Enable VPN Service check box is selected.
6. Specify any VPN service settings on the page.
For more information, see
7. Click the For Smart Phone button to download the OpenVPN configuration files.
8. On your Android device, download and install the OpenVPN Connect app from the Google Play Store.
9. On your computer, unzip the configuration files that you downloaded and send the files to your Android device.
10. Open the files on your Android device.
11. Open the .ovpn file using the OpenVPN Connect app.
For more information about using OpenVPN on your Android device, visit
http://www.vpngate.net/en/howto_openvpn.aspx#android.

Use a VPN Tunnel on Your Windows Computer

After you set up the router to use VPN and install the OpenVPN application on your computer, you can open a VPN
tunnel from your computer to your router over the Internet.
For the VPN tunnel to work, the local LAN IP address of the remote router must use a different LAN IP scheme from
that of the local LAN where your VPN client computer is connected. If both networks use the same LAN IP scheme,
when the VPN tunnel is established, you cannot access your home router or your home network with the OpenVPN
software.
The default LAN IP address scheme for the router is 192.x.x.x.The most common IP schemes are 192.x.x.x, 172.x.x.x,
and 10.x.x.x. If you experience a conflict, change the IP scheme either for your home network or for the network
with the client VPN computer. For information about changing these settings, see
on page 60.
Nighthawk X4S AC2600 Smart WiFi Router
Specify VPN Service in the Router
Use VPN to Access Your Network
167
on page 161.
Change the LAN TCP/IP Settings