Set Up And Manage Dynamic Dns; Set Up Ftp Access Through The Internet - NETGEAR Nighthawk X4S User Manual

Set Up and Manage Dynamic DNS

Internet service providers (ISPs) assign numbers called IP addresses to identify each Internet account. Most ISPs
use dynamically assigned IP addresses. This means that the IP address can change at any time. You can use the
IP address to access your network remotely, but most people don't know what their IP addresses are or when this
number changes.
To make it easier to connect, you can get a free account with a Dynamic DNS service that lets you use a domain
name to access your home network. To use this account, you must set up the router to use Dynamic DNS. Then
the router notifies the Dynamic DNS service provider whenever its IP address changes. When you access your
Dynamic DNS account, the service finds the current IP address of your home network and automatically connects
you.
If your ISP assigns a private WAN IP address (such as 192.168.x.x or 10.x.x.x), the Dynamic DNS service does not
work because private addresses are not routed on the Internet.

Set Up FTP Access Through the Internet

To set up FTP access:
1. Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > ReadySHARE > Advanced Settings.
The ReadySHARE Advanced Settings page displays.
5. Select the FTP (via Internet) check box.
6. Click the Apply button.
Your changes are saved.
7. To limit access to the admin user, click the Edit button.
The Edit page displays.
8. In the Read Access list, select admin.
9. In the Write Access list, select admin.
10. Click the Apply button.
Your settings are saved.
Use Dynamic DNS to Access USB Storage Devices Through the Internet
Nighthawk X4S AC2600 Smart WiFi Router
123