Factory Settings - NETGEAR Nighthawk X4S User Manual

Factory Settings

You can return the router to its factory settings. Use the end of a paper clip or a similar object to press and hold the
Reset button on the back of the router for at least seven seconds. The router resets and returns to the factory
configuration settings shown in the following table.
Table 3. Factory default settings
Feature
Router login User login URL
User name (case-sensitive)
Login password (case-sensitive)
Internet connection WAN MAC address
WAN MTU size
Port speed
Local network (LAN) LAN IP
Subnet mask
DHCP server
DHCP range
Time zone
DHCP starting IP address
DHCP ending IP address
DMZ
Time adjusted for daylight saving time
SNMP
Firewall Inbound (communications coming in from
the Internet)
Outbound (communications going out to
the Internet)
Source MAC filtering
Nighthawk X4S AC2600 Smart WiFi Router
Supplemental Information
183
Default Setting
www.routerlogin.com or www.routerlogin.net
admin
password
Use default hardware address
1500
AutoSensing
192.168.1.1
255.255.255.0
Enabled
192.168.1.2 to 192.168.1.254
Pacific time
192.168.1.2
192.168.1.254
Disabled
Disabled
Disabled
Disabled (except traffic on port 80, the HTTP port)
Enabled (all)
Disabled