Troubleshooting - Iomega Zip 250 Drive Zip

Troubleshooting

IMPORTANT! The Zip
latest USB specification. However, there are some USB
devices (including controller chips and hubs) currently
available on the market that do not conform to the USB
standard. If you experience problems after connecting the
Zip 250 USB drive, your system may contain a noncompliant
USB controller. Contact the manufacturer of the USB
controller or your computer for possible solutions. We also
recommend checking the Iomega web site
(http://www.iomega.com) frequently for updated software and
the latest information on USB.
The Zip disk icon does not appear on a Mac
®
OS Desktop.
1. Check all connections.
2. Make sure the drive is receiving power.
3. Make sure you are using the USB cable that came
with your Zip
4. If you are using a Mac, make sure the 250MB Zip
disk is fully inserted in the drive. A Zip disk icon will
not appear on the Mac Desktop until a disk is inserted
into the drive. When a disk is inserted, allow a few
seconds for it to spin up and mount on the Mac
Desktop.
5. Make sure IomegaWare
IomegaWare software package shipped with your
drive includes drivers required for Zip
6. If you are connected to a USB hub, ensure the hub is
connected correctly and has power.
7. Try connecting the Zip
USB connections on your computer, rather than a
® 250 USB drive is designed to the
®
drive.
™
software is installed. The
® drive directly to one of the
®
®
USB drives.