WXGA HD positive / inverting switching function; support playback recorded clips video capabilities *; The product can support 32G. It is mainly applied in a vehicle to be your silent witness in the event of an accident. * When the camera is fitted to a monitor Product Features: Built-in G-sensor acceleration transducer.
Page 3
Function Button Introduce Enter Button: It is stop or start-up the video recording by press the button; Long press the button for 5s, the camera will turn off; In the setting menu, it is used for to ‘confirm’ button. Menu Button: Short press the button enter into the menu page; Long press the button enter the browse mode. Up Button: In menu setup mode, press it to select menu upside;...
Page 4
Operation Guidance Please connect the cable as below : Connect the yellow wire to the positive pole of battery, connect the black wire to negative pole of battery, connect the red wire to ACC of car, and connect yellow RCA plug to monitor input. When turning on the ACC of the car, the machine will begin to record a video automatically.
Page 5
1-OK 2-Menu 3-up 4-Down MENU (To stop the camera from recording use button 1 to stop the recording) To enter the Menu press button and use button to move from Video Settings to General Settings. And use buttons to navigate up and down the options and use button to confirm.
Page 6
Record Audio Turn the microphone On and Off Date Stamp This places the time and date into the video file G-Sensor Set the G-sensor as required. ( For more information please see page 7) Format Format the SD card, Please note doing this will delete all files, please make sure you have backed up your files before continuing , please also note it is good practise to format the sd card every 4-5 weeks to keep them in good working order.
Page 7
How much storage do I get on my camera Setting Size 8GB Card 32GB Card 720P 1280 x 720 180 min 720 min WVGA WXH 848 x 480 256 min 1024 min 640 x 480 533 min 2132 min QVGA 320 x 240 1504 min 6016 min...
Need help?
Do you have a question about the SW001 and is the answer not in the manual?
Questions and answers