Unpacking - Nilfisk-ALTO Floortec R 360 P User Manual

Nilfisk-alto steam cleaner user manual
Table of Contents

Advertisement

USER MANUAL
ENGLISH
WARNING!
Carefully read all the instructions before carrying out
any maintenance/repair procedure.
Take all necessary precautions to prevent hair,
jewels and loose clothes from being caught in the
moving parts of the machine.
Do not leave the machine unattended with the key
inserted in the ignition switch and the parking brake
disengaged.
Do not use the machine on slopes with a gradient
exceeding the value shown on the machine.
Do not wash the machine with direct or pressurised
water jets, or with corrosive substances. Do not use
compressed air to clean this type of machine.
Do not use the machine in particularly dusty areas.
While using this machine, take care not to cause
damage to other people, especially children.
Do not put any can containing fluids on the machine.
The storage temperature must be between 0°C and
+40°C.
The machine operating temperature must be
between 0°C and +40°C.
The humidity must be between 30% and 95%.
Always protect the machine against the sun, rain and
bad weather, both under operation and inactivity
condition.
Do not use the machine as a means of transport.
Do not allow the brooms to operate while the machine
is stationary to avoid damaging the floor.
In case of fire, possibly use a powder fire
extinguisher, not a water one.
Do not bump into shelves or scaffoldings, particularly
where there is a risk of falling objects.
Adjust the operation speed to suit the floor conditions.
Do not tamper with the machine safety guards and
follow the ordinary maintenance instructions
scrupulously.
Do not remove or modify the plates affixed to the
machine by the Manufacturer.
In case of machine malfunctions, ensure that these
are not due to lack of maintenance. Otherwise,
request assistance from the authorised personnel or
from an authorised Service Center.
In case of part replacement, order ORIGINAL spare
parts from an authorised Dealer or Retailer.
4
FLOORTEC R 360 P
To ensure the proper and safe operation of the
machine, have the scheduled maintenance, detailed
in the related chapter of this Manual, performed by
the authorised personnel or an authorised Service
Center.
The machine must be disposed of properly, because
of the presence of toxic-harmful materials (oils,
plastics, etc.), which are subject to standards that
require disposal in special centres (see the Scrapping
chapter).
If the machine is used according to the instructions,
the vibrations do not cause dangerous situations. The
machine vibration level is less than 2.5 m/s
1033-1995-08).
While the petrol engine is running, the silencer warms
up; do not touch the silencer when it is hot to avoid
burns or fires.
Running the engine with an insufficient quantity of
petrol can seriously damage the engine. Check the oil
level with the engine off and the machine on a level
surface.
Never run the petrol engine without air filter, as the
engine could be damaged.
Technical service operations on petrol engine must
be performed by an authorised Dealer.
Use only original spare parts or equivalent for the
petrol engine. Using spare parts of lower quality can
seriously damage the engine.
Be very careful when operating the machine at high
speeds: sudden steering could cause this
three-wheel machine to become unstable due to
weight distribution. Always reduce the speed before
steering.

UNPACKING

Upon delivery carefully check that the machine and its
packing, if any, have not been damaged during
transportation. In case of visible damages, keep the
packing and have it checked by the Parcel Service that
delivered it. Call the Carrier immediately to fill in a damage
claim.
Please check that the following items have been supplied
with the machine:
Sweeper manual
Petrol engine manual
Spare Parts List
No. 1 50 A fuse
2
(EN
146 2598 000(1)2005-03 A

Advertisement

Table of Contents
loading

Table of Contents