List Of Settings - Sony MB-8N Operating Instructions Manual

Settings

List of Settings

Tuner base unit setting items
The MB submenu provides setting items relating to the
MB-8N unit (this unit).
For details of individual items, see the page numbers shown
in parenthesis.
Submenu
Setting items
ATT: RF attenuator setting for each
antenna (page 27)
DC: Whether or not 9V DC is supplied
from the ANTENNA A and B IN/DC
9V OUT connectors (page 27)
AF: Audio output levels output from the
AUDIO OUT connectors of each
WRU-8N unit (page 27)
MON: Assigning headphone output slots
(page 27)
24
Setting refers to
AntA: antenna A
AntB: antenna B
ALL: both antennas A and B
MB-8N unit
1: Output of AUDIO OUT connector 1
2: Output of AUDIO OUT connector 2
3: Output of AUDIO OUT connector 3
4: Output of AUDIO OUT connector 4
ALL: All outputs of AUDIO OUT
connectors 1 to 4
L: output to left headphone channel
R: output to right headphone channel
Setting
OFF, 5, 10, 15 (unit: dB)
Factory default: OFF
OFF, ON
Factory default: ON
LINE (–20dBm), MIC (–58dBm), OFF
(no output)
Factory default: LINE
1, 2, 3, 4 (audio from slots 1 to 4),
1&2 (when "L" is selected, mixed audio
from slots 1 and 2),
3&4 (when "R" is selected, mixed audio
from slots 3 and 4),
ALL (mixed audio from slots 1 to 4)
Factory defaults L: 1&2, R:3&4