Storage; Maintenance And Care; Troubleshooting - Kärcher HD 5/13 C Manual

Check the lifting unit for damage prior to
–
each transport by crane.
Only lift the appliance using the carrying
–
handle.
Do not use stop chains.
–
Protect the lifting device from inadvert-
–
ent load release.
Remove spray lance with hand spray
–
gun, nozzles, surface cleaner and other
loose objects prior to transportation by
crane.
Do not transport any articles on the ap-
–
pliance during the lifting process.
The appliance must only be transported
–
by properly trained crane personnel.
Do stand stand below the load.
–
Ensure that no persons are present in
–
the immediate vicinity of the crane.
Do not leave the appliance on the crane
–
unattended.

Storage

Caution
Risk of injury and damage! Note the weight
of the appliance in case of storage.
This appliance must only be stored in inte-
rior rooms.

Maintenance and care

Danger
Risk of injury by inadvertent startup of ap-
pliance and electrical shock.
First pull out the plug from the mains before
carrying out any tasks on the machine.
Safety inspection/ maintenance
You can sign with your dealer a contract for
regular safety inspection or even sign a
maintenance contract. Please take advice
on this matter.
22
contract
Before each use
 Check connection cable for damages
(risk of electrical shock); get the dam-
aged connection cable replaced imme-
diately by an authorised customer
service person/ electrician.
 Check the high pressure hose for dam-
ages (risk of bursting).
Please arrange for the immediate ex-
change of a damaged high-pressure hose.
 Check appliance (pump) for leaks.
3 drops per minute are permitted and
can come out from the lower side of the
appliance. Call Customer Service if
there is heavy leakage.
 Clean the sieve in the water connection.
 Clean filter at the detergent suck hose.
Clean the sieve in the water
 Unscrew the covering nut.
 Pull out the hose nipple with the sieve.
 Clean the sieve from the outside and
rinse it.
Note:
Align the hexagon of the hose nipple in the
appliance for connection.
 Insert the hose nipple with the sieve
and tighten the union nut.

Troubleshooting

Danger
Risk of injury by inadvertent startup of
–
appliance and electrical shock.
First pull out the plug from the mains before
–
carrying out any tasks on the machine.
Get the electrical components checked
–
and repaired only by authorised cus-
tomer service persons.
Contact an authorised customer service
–
person in case of problems not men-
tioned in this chapter or if you are in
doubt or when you have been explicitly
asked to do so.
– 6
EN
Weekly
connection