Airstream classic 2006 Owner's Manual page 80

ELECTRICAL
TV ANTENNA
Manufacturer:
Winegard Company
3000 Kirkwood Street
Burlington, Iowa 52601
Phone: 800-843-4741
Raising Antenna to Operating Position
G
Turn elevating crank in "UP" direction until some resistance to turning is noted. An-
tenna is now in operating position.
Rotating Antenna
Make sure antenna is in "UP" position. Pull down on directional handle with both
hands until it disengages ceiling plate and rotate for best picture and sound on televi-
sion set.
Lowering Antenna to Travel Position
Rotate antenna until pointer on directional handle aligns with pointer on ceiling plate.
WARNING
: Antenna must be in "down" position while traveling to
prevent damage.
Turn elevating crank in the "Down" direction until resistance is noted. Antenna is now
locked in travel position.
NOTE: The TV Booster must be on to receive antenna sig-
nals and off for cable TV operation.
G - 13