Airstream classic 2006 Owner's Manual page 77

Table of Contents

Advertisement

WARNING
: The GFCI circuit breaker provides protection only to the circuit
to which it is connected. It does NOT provide protection to any other circuit.
OCCUPANT:
Make this test each month and record the date on the chart.
1. With the breaker switch in the "ON" position, press PUSH TO TEST button.
2. The breaker switch should move to TRIP position, indicating that GFCI breaker has
opened the circuit.
3. To restore power push the breaker switch to the "OFF" and then raise it to "ON
Important: If the breaker switch does not move to TRIP position when test button is
pressed, the GFCI breaker protection is not complete. If this happens, replace GFCI
breaker.
Remote Generator Hook Up (optional equipment)
The remote generator hook up will be located on the front plate of the trailer just behind
the LPG bottles. A generator can be plugged into the 110-volt system using this plug
and a power cord supplied separately with this option.
The system includes a automatic transfer switch to prevent a power overload if a
generator is started while the trailer's 110-volt shoreline is plugged into a 30 amp
service. The transfer switch will automatically switch power from a shoreline source to
a generator when it senses power entering the switch from the generator. When power
is cut from the generator, the switch returns to the shoreline as its power source.
A minimum of 5.5 KW with a 30-amp breaker will be required to sufficiently power the
30 amp service.
INVERTOR (option)
The Inverter powers the TV and one additional labeled 110 volt receptacle. The in-
verter converts 12 volt electricity from your batteries into 110 volt power. The switch
for the inverter is locatedunder the monitor panel. Overloading the inverter will cause
a automatic shut off to activate. Removing the load will allow the inverter to reset.
Door Bell
The door bell module is located under the galley flip up shelf on all models except the
34 ', which is located under the dinette table. The module uses 4 "C" batteries. The
batteries should be removed during long periods of storage.
G - 10
ELECTRICAL
G

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents