Niles RCA-HT Installation Manual page 8

Niles audio rca-ht remote control anywhere! kit installation guide
Table of Contents

Advertisement

INSTALLATION
(CONTINUED)
STEP 3 – CONNECTING THE 12VDC IN-LINE POWER SUPPLY
AND MICROFLASHERS
Plug the MicroFlashers into any of the sockets labeled FLASHER OUTPUTS on the connection hub
(Figure 5). Plug the connector on the supplied 12VDC power supply into the socket labeled POWER
on the connection hub and then plug the wall adapter into a live electrical outlet. The power LED
should light. If the LED does not light, confirm that the outlet you used is live by plugging in a lamp.
Figure 5: Connection Ports
TECH TIP:
Make all final connections to the MSU before connecting the power supply.
This will avoid potential damage to components.
6

Advertisement

Table of Contents
loading

Table of Contents