Table of Contents
Advertisement
INSTALLATION
(CONTINUED)
STEP 5 – MOUNTING THE CONNECTION HUB
Make sure that your system tested OK before proceeding
Once you have decided on the ideal location for the connection hub, unplug the 12VDC power
supply from the electrical outlet and disconnect the sensor and the MicroFlasher cables from the
connection hub (Figure 8). The connection hub can be either mounted on a wall using screws or
placed on a shelf using the included adhesive feet (Figure 9).
Figure 8: Removing Cables
Figure 7: Locating IR Sensor
8
Advertisement
Table of Contents
