Niles RCA-HT Installation Manual page 6

INSTALLATION
STEP 1 – PLACING THE CONNECTION HUB
Place the Connection Hub so that the MicroFlasher wires will reach the components.
Never place the connection hub closer than 1' away from a television set (Figure 1).
To unswitched
AC Outlet
4
To Niles IR Flasher
MSU250
MS210 Sensor
Figure 2: MSU250 Installation
To 12VDC Power Supply
Plugged into a switched
AC Outlet. Typically
found in back
of a receiver.
MSU250 Sensor
Connection