Switches / Fuel Gauge; On/Off Switch - Ikelite DS160 Instructions Manual

SWITCHES / FUEL GAUGE

The DS160 features separate switches for power on/off and firing modes. The arrow on
the switch points to the selected position.

ON/OFF SWITCH

OFF: The horizontal switch position is OFF. The adjacent tab locks the switch in the OFF
position. To unlock, slide the tab away from the switch. Always turn the Substrobe OFF
before opening the strobe.
ON: There are two ON positions. Rotating the switch clockwise to the first ON position
turns on the power to the Substrobe. Further rotation of the switch clockwise to the
second ON position turns on both the power to the Substrobe and the modeling light.
TEST: Occasionally check the battery capacity by rotating the switch counter-clockwise
to the "Batt w/Lite" battery position and referencing the fuel gauge on the side of the
strobe. The "Batt w/Lite" battery position also turns ON the modeling light.
Switch Lock
16
Tes t
On
On
w / Li t e
Battery
Compartment
DS160 Strobe
Fuel Gauge
TTL
Ful l
- 1
O
- 4
Fuel
Gauge
3
- 2
2
3
1