Virtual Servers Add - ZyXEL Communications PMG5318-B20B User Manual

6.1.1 Virtual Servers Add

This screen lets you create or edit a virtual server rule. Click Add in the Virtual Servers screen to
open the following screen.
You may enter a single port number or a range of port numbers to be forwarded, and the local IP
address of the desired server. The port number identifies a service; for example, web service is on
port 80 and FTP on port 21. In some cases, such as for unknown services or where one server can
support more than one service (for example both FTP and web service), it might be better to
specify a range of port numbers. You can allocate a server IP address that corresponds to a port or
a range of ports.
Figure 28 Virtual Servers Add
Table 24 Virtual Servers Add
LABEL
Use Interface
Service Name
Chapter 6 Network Address Translation (NAT)
DESCRIPTION
Select a WAN interface for which you want to configure a virtual server rules.
Select a Service: use the drop-down list to select a service.
Custom Service: type a name to specify a different service.
PMG5318-B20B User's Guide
42