Safety Information, Power Specifications; Environmental Operating Conditions; Compliance Acknowledgments - CUMMINS ALLISON JetScan User Manual

Safety information, power specifications

• Voltage operating range: 105-130 VAC or 198-253 VAC, manual switching
• Frequency: 50/60 Hz
• Full load amps (FLA): 1A/.5A
• Electrical supply circuit: The customer must provide a single-phase, dedicated power line that meets the
machine's power requirements. Use a properly grounded circuit breaker in compliance with applicable local
electrical code.
Environmental operating conditions
• Temperature: 60°F - 85°F (15°C - 29°C)
• Humidity: 30% to 70% (non-condensing)
Compliance acknowledgments
• Laser: This equipment may contain Class 2 laser products and complies with FDA Radiation Performance
Standards, 21 CFR Subchapter 1 and the international laser safety standard IEC-60825.1-2001-08.
• FCC: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
• Regulatory: UL/CUL/FCC/CE
2 | Single-pocket JetScan
High voltage inside. Risk of electric shock.
Turn power OFF and unplug power cord from machine before
cleaning.
Do not attempt repairs. Repairs must be made by authorized
Cummins Allison personnel.
Use grounded plug and properly grounded outlet.
Read and understand all instructions before use.
Improper voltage levels can cause equipment malfunction,
damage electrical components, and void warranty.
Provide separate circuit serving only this device and follow listed
power requirements to ensure proper operation.
Provide power conditioning/stabilizing devices if necessary.
currency scanner | Safety information, power specifications
®