Stopping Conditions And Recovery Steps; Denomination Change Only; Denomination Change And Strap Limit - CUMMINS ALLISON JetScan User Manual

Stopping conditions and recovery steps

The following conditions cause the machine to stop and require action by the user.
Condition
The machine identified a
note that is different than those it was
processing while in SORT mode.
The change in denomination is the top
note in the pocket.
Action
Remove all notes from the
pocket. Separate the top note from the
remaining notes. Put the top note in the
location for that denomination. Put all the
other notes (they are the same) in the
location for that denomination.
The machine will automatically restart.
12 | Single-pocket JetScan currency scanner | Stopping conditions and recovery steps
®
Denomination change only
Denomination change and strap limit