CUMMINS ALLISON JetScan User Manual page 19

4
5
6
Curved edge
7
Stopping conditions and recovery steps | Single-pocket JetScan
Raise the two red plastic "T" handles at the same
time and hook them onto the metal shaft. Next, do
any of the following:
Remove all jammed notes and foreign material.
Unhook the two red plastic "T" handles from the
metal shaft and lower them at the same time.
Replace the feeder plate. Insert the curved edge of
the feeder plate first. Gently press down on the
feeder plate until it snaps into position.
Replace the hopper extension and press CONT.
Reprocess all notes that were in the hopper and
pocket at the time of the jam.
• Move jammed notes by turning the large black
feed rollers forward (direction of note flow). This
action moves other shafts and rollers while
sending dirt or stray material out of the unit.
• Press FWD to slowly move the feeder forward.
• Press REV to slowly move the feeder in reverse.
currency scanner | 19
®