Recording; Notes - Sony STR-DA80ES Operating Instructions Manual

Receiver Operations
To insert a space
Press V or v until a blank space appears in the
display (the space is between " " " and "A").
If you've made a mistake
Press B or b repeatedly until the character you
want to change flashes. Then select the right
character.
To assign index names to other stations
Repeat Steps 2 to 4.
z
You can display either the preset station name
(program source name) or frequency (component
originally meant for the selected jacks)
Each time you press DISPLAY, the display switches
between the frequency (or component originally meant
for the selected jacks) and the preset station name
(program source name).
18

Recording

This receiver makes it easy to record to and from the
components connected to the receiver. You don't have
to connect playback and recording components
directly: once you select a program source on the
receiver, you can record and edit as you normally
would using the controls on each component.
Before you begin, make sure you've connected all
components properly.
POWER
DISPLAY
VIDEO 1 VIDEO 2 VIDEO 3 LD/DVD TV/DBS
S-VIDEO VIDEO L AUDIO R VIDEO 3 {MEMORY} FM MODE TUNING
INPUT –
SPEAKERS
A
OFF B
PRESET TUNING
+
A B – +
SHIFT FM/AM
PHONES
Playback component
(program source)
ç: Audio signal flow
c: Video signal flow
Recording on an audio tape or MiniDisc
You can record on a cassette tape, Digital Audio Tape
or MiniDisc using the receiver. See the instruction
manual of your cassette deck, DAT deck, or MD deck if
you need help.
1
Select the component to be recorded.
2
Set the component to be ready for playing.
For example, insert a CD into the CD player.
3
Insert a blank tape or an MD into the recording
deck and adjust the recording level, if necessary.
4
Start recording on the recording deck and then
start playing the component.

Notes

• The signal input from a digital jack is not output to the
analog REC OUT jacks. To do analog recording, be sure to
connect the component to the analog input jacks.
• Sound adjustments do not affect the signal output from
the DAT MD OPTICAL OUT, DAT/MD REC OUT, and
TAPE REC OUT jacks.
FUNCTION
MUTING
MASTER VOL
SUR
PANEL
EQ UP/DOWN
INDEX
TAPE DAT/MD CD TUNER PHONO
EQUALIZER DPC SET UP BALANCE
•
+ MODE
BAND CH
B b
0 10
L R
MODE FUNCTION
SOUND FIELD GENRE MODE
DIRECT BASS INPUT
PASS BOOST MODE
Recording component
(tape deck, DAT deck,
MD deck, VCR)