Recording - Sony RDS EON STR-DE515 Operating Instructions Manual

16"
Receiver Operations
You can select the following programme types:
Programme
type What you hear
NONE Any programmes not defined below
NEWS News programmes
AFFAIRS Topical programmes that expand on
current news
INFO Programmes about consumer affairs,
medical advice, and weather
SPORT Sports programmes
EDUCATE Educational programmes, such as a
"how-to" programme and advice
DRAMA Radio plays and serials
CULTURE Programmes about national or regional
culture, such as religion, language, and
societal concerns
SCIENCE Programmes about the natural sciences
VARIED Programmes containing celebrity
interviews, panel games, and comedy
POP M Popular music programmes
ROCK M Rock music programmes
M.O.R.M Easy Listening (middle of the road music)
LIGHT M Classical music, such as instrumental,
vocal, and choral
CLASSICS Performances of major orchestras,
chamber music, opera, etc.
OTHER M Music that does not fit into any of the
above categories, such as jazz and
rhythm and blues
ALARM Emergency announcements
Note
If there is an emergency announcement by governmental
authorities, ALARM flashes in the display.
i fae Ee aE a
Recording
This receiver makes it easy to record to and from the
components connected to the receiver. You don't have
to connect playback and recording components
directly: once you select a programme source on the
receiver, you can record and edit as you normally
would using the controls on each component.
Before you begin, make sure you've connected all
components properly.
Function buttons
Recording component
(Tape deck, MD deck,
VCR)
Playback component
(programme source)
==; Audio signal flow
==: Video signal flow
Recording on an audio tape or MiniDisc
You can record on a cassette tape or MiniDisc using the
receiver. See the instruction manual of your tape deck
or MD deck if you need help.
1 Press one of the function buttons to select the
programme source.
2 Set the component to be ready for playing.
For example, insert a CD into the CD player.
3 Insert a blank tape or disc into the recording deck
and adjust the recording level, if necessary.
4 Start recording on the recording deck and then
start playing the component.
Note
No REC OUT signal is available in 5.1/DVD mode. f