Xinje TH465-M Manual page 61

Step2: double click import CSV data, change the parameters as the following:
(1) Source path tab
Please see the following picture: the import data when select start ID to 5 and 10.
When the start ID is 0 or 1, the import data is the first group.
Device ID: the device number of import device
Dynamic set: set the device ID in D register.
Import control: control the import process by M
coil, when M is ON, the import process starts.
Path/File: the CSV file name
Fix name: the import data are from the same
source file
Add ID after name: set the import file name by
the input value or the value in D register.
Start ID: the import data head number. Dynamic
set: can set the head address in D register.
When start ID is 5, import these data.
When start ID is 10, import these data.