7. Application
7.1 Adjust the touch area
The touch area adjustment function can make the component touch more precise.
Ø
The adjustment steps:
Step 1: turn on the DIP switch 3, then power on the TH again, it will show the following screen:
1
2
3 4
● Turn on switch 3
Step2: After clicking the cross center, the adjust cross will jump to the second position. Keep on click the
cross until the cross jump to the last position 5.
Calibrate the touch panel
Repeat as the target moves around the screen
1
2
Step 3: Please see the detailed motion:
O N
O F F
5
3
Calibrate the touch panel
Repeat as the target moves around the screen
● Click the center of the adjust cross
4
Adjust cross