Fujitsu fi-5950 Getting Started page 9

9. In the [Scan Settings] dialog box, clear the [Save to
file] checkbox.
You only check the operation now, so you do
not have to save to file.
HINT
10. Click [Scanner Settings].
⇒
A setup dialog box appears for you to configure
scanner driver settings.
11. Configure scanner settings such as the resolution
and paper size.
TWAIN driver/ISIS driver scanner drivers:
Configure scan settings, and then click the [OK]
button.
For a TWAIN driver, the scanner driver setup
dialog box may be displayed again after the
HINT
[OK] button is clicked. If this occurs, click the
[Scan] button in the dialog box.
12. In the [Scan Settings] dialog box, click the [Scan]
button.
⇒
The document is scanned and the scanned image is
displayed in the [ScandAll PRO] window.
If the scanned document image is displayed in the window, it
means that the scanner driver is installed properly.
For further information about how to scan documents, refer to
rhe "fi-5950 Operator's Guide" or "ScandAll PRO User's
Guide" contained in the Setup DVD-ROM.
9