TATA Motors Indigo eCS Owner's Manual & Service Book page 68

BEFORE DRIVING
NOTICE
The A.C. compressor gets switched 'OFF' automatically
when engine gets overheated. The A.C. is automatically
switched 'ON' when the engine cools down.
Normal Cooling :
A.C. - ON
Knob 'B' - Desired speed position
Knob 'C' - Towards face
Switch 'E' - Suitably as explained
Quick Cooling :
If your car is left in the sun with window closed, inside
temperature increases.
To achieve quick cooling effect, open the windows briefly
while you operate the air conditioner, with air circulation
switch is in Fresh mode, fan at higher speed and air direction
towards 'FACE'. All vents to be opened completely.
Once temperature inside has come down sufficiently, close
the windows and change air circulation suitably to fresh/
recirculation.
66
HEATING, VENTILATION & AIR CONDITIONING
Demisting :
In rainy season or in areas of high humidity, mist formation
inside windshield glass is observed. To clear mist
dehumidified air is passed on the windshield glass.
The position of control knobs should be adjusted as
follows :
A.C. - ON
Knob 'B' - desired speed position
Knob 'C' - Towards windshield
Knob 'A' (Vehicles fitted - at suitable temperature
with HVAC)
Air circulation - at suitable position
NOTICE
When mist gets cleared switch the knob "C' position to
Face mode. In high humidity areas, if cold air continues
to flow over windshield, it may cause sudden fogging on
outside surface of windshield.
Defrosting :(For vehicles fitted with HVAC unit)
In low temperature areas, to clear frost formation outside
the windshield glass, this setting is used.
First start the engine and accelerate to warm up.