TATA Motors Indigo eCS Owner's Manual & Service Book page 122

MAINTENANCE & CAR CARE
WHEELS & TYRES :
Always use only the recommended size of wheel rims & tyres. Use
of non-recommended rims and tyres may have an adverse effect on
car safety and furthermore could infringe on car regulations.
Wheel Change :
When changing wheels, use the jack provided with the car. The jack
with handle is located on tailgate inner sill.
• Park the car on a safe level ground. Engage 1st gear and also
apply the parking brake. Place wheel chocks behind the rear wheels
and in front of the front wheels.
• Remove the wheel rim cover (if fitted) which is snap fitted.
• Loosen the wheel pins of the wheel to be changed slightly. Keep
the spare wheel to be fitted nearby.
• Jack up the car by placing the jack at the appropriate location.
• Remove the wheel pins and the wheel.
• Fit the new wheel and tighten the wheel pins.
• Lower the jack and tighten the wheel pins to 8 mkg. torque. Fit the
wheel rim cover.
The jack should never be supported on any of the body sheet metal
components. This can cause damage to the body. Do not apply oil
on the wheel pins. Wipe off the oil if present.
120
NOTICE
WHEELS & TYRE
1
1. Spare Wheel 2. Jack Location
Tool Kit Location
2