TATA Motors Indigo eCS Owner's Manual & Service Book page 38

Hide thumbs Also See for Indigo eCS:
Table of Contents

Advertisement

BEFORE DRIVING
Learning of New Remotes : To Learn new remote
following procedure to be followed.
i) Put the vehicle key into the steering lock and turn the
Ignition key to ON and OFF position 3 times then turn
the ignition back on within 5 seconds.
ii) After step (i) above the Control Unit enters the Remote
Learning mode indicated by flashing of turn indicators
(4 times) within 8 seconds follow step (iii) below or Learn
routine would be exited.
iii) Press Lock and Unlock buttons together. Learning of
remote would be confirmed by actuators moving to Lock
position and then to unlock position and fast blinking of
dashboard LED for 2 to 3 seconds. To learn second
remote repeat step (iii) within 8 seconds. To erase old
lost remote: Learning a new remote would erase the
previously learnt remotes.
Important :
For security reasons, every system can accept a maximum
of only two remotes.
Every learning procedure disables the remotes which the
system had previously 'learnt'.
In case of any error in performing the above sequences the
whole procedure has to be repeated from step no. i above.
36
ELECTRICAL SECURITY SYSTEM
Battery changing procedure for Indica/Indigo Remote
Key :
Back view of Remote Key
Battery Specification - LiCoin Battery
Remote after opening the
back side screw

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents