Tv Mode Settings - LEXIBOOK LCDDVD2TFFR Instruction Manual

TV MODE SETTINGS

Press the INPUT button on the remote control, then use the▲ and ▼buttons to set the video source to
"TV", and press ENTER to confirm.
IMAGE menu
Picture mode
1. Press the LCD-MENU button, then use the ◄ and ► buttons to select the "IMAGE" menu.
2. Use the ▲ and ▼buttons to select the "Image Mode" option.
3. Use the ◄ and ► buttons to select a picture mode: "Standard", "Personal", "Movie", "Sport", "Soft" or
"Game".
Contrast, Brightness, Color, Tint, Sharpness, Color temperature, DNR
1. Press the LCD-MENU button, then use the and buttons to select the "IMAGE" menu.
2. Use the ▲ and ▼buttons to select the desired option, then press the ◄ and ► buttons to carry out
the settings:
• "Contrast": Adjust the picture contrast.
• "Brightness": Adjust the picture brightness.
• "Color": Adjust the color intensity.
• "Tint": To change this setting, you need to use an NTSC system.
• "Sharpness": Adjust the picture sharpness ("Normal", "Sharp", "Sharpest", "Softest" or "Soft").
• "Color temperature": The default setting of this option is "Normal", you cannot change it in TV mode.
• "DNR" (Digital Noise Reduction): The DNR allows you to improve the image quality by reducing
interference. You may select one of the following settings: "Off", "Low", "Mid" or "High".
Note: After a few seconds of inactivity, you will automatically exit the menu.
AUDIO menu
1. Press the LCD-MENU button, then use the ◄ and ► buttons to select the "AUDIO" menu.
2. Use the ▲ and ▼buttons to select the desired option: "Volume", "Sound mode" ("Personal", "Voice",
"Music" or "Theater"), "Bass", "Treble" or "Balance". Press the ◄ and ►buttons to carry out the settings.
Note: After a few seconds of inactivity, you will automatically exit the menu.
PARAMETERS menu
Country
1. Press the LCD-MENU button, then use the ◄ and ► buttons to select the "PARAMETERS" menu.
2. Use the ▲ and ▼buttons to select the "COUNTRY" option.
Automatic scan for radio stations
1. Press the LCD-MENU button, then use the ◄ and ► buttons to select the "PARAMETERS" menu.
2. Use the ▲ and ▼buttons to select the "Automatic Search" option. Press ENTER or ► to start the
automatic channel scan.
3. Press ENTER to confirm and start the automatic scan of radio stations. When the search is finished,
the device will broadcast the channel 1.
4. You may press ENTER to display the list of preset stations. Then use the ▲and▼ buttons to select a
radio station and press ENTER to view it.
Note:
• If you wish to cancel the scanning process, you can press LCD-MENU or DVD SETUP/EXIT at any
time.
• If the preset stations are not displayed in the desired order, you can use the option "Change Station
Name" to change the order.
Manual scan for radio stations
1. Press the LCD-MENU button, then use the and buttons to select the "PARAMETERS" menu.
2. Use the ▲ and ▼buttons to select the "Manual Search" option, then press ENTER or to access the
menu of manual channel setting.
31