Sound Mode; Lcd Menu; Sleep; Display - LEXIBOOK LCDDVD2TFFR Instruction Manual

Sound mode (SMODE button)
Repeatedly press the PMODE button to select one of the following sound modes:
Personnel

SLEEP

The SLEEP button allows you to program an automatic standby of your LCD display.
Repeatedly press the SLEEP button to select the desired delay time (in minutes): 0 Min, 15 Min., 30
Min., 45 Min., 60 Min., 75 Min., 90 Min., 105 Min. or 120 Min.
To deactivate the sleep timer, repeatedly press SLEEP to select "0 Min.".

DISPLAY

In TV mode, press once the DISPLAY button on the remote control to display information about the
current program (channel number, audio system, signal type, etc.). Press once again to remove the
information.

Subtitles (TNT function)

In DTV mode, press SUBTITLE to activate or deactivate the subtitles for the current program.
Note: The availability of this function depends on the program.

NICAM button (TNT function)

In TV mode, press the NICAM button to switch between a stereo and mono audio system.

Language (TNT function)

Repeatedly press the AUDIO/LANG button to change the audio language of the current program.
Note: The availability of this function depends on the program.

Image aspect

Repeatedly press the ASPECT button to directly change the format or video display type: "Full screen",
"Zoom1", "Zoom2", "Auto", "4:3", "14:9", "16:9" or "Subtitle".

Electronic program guide

The electronic program guide (or EPG) allows you to display a program guide (up to one week).
Press the LCD-MENU button to access the configuration menu.
1. Use the ◄ and ► buttons to select the desired menu ("IMAGE" menu, "AUDIO" menu,
"PARAMETERS" menu, "TIMER" menu or "FUNCTION" menu).
2. Use the ▲ and ▼buttons to select an option.
3. Press the◄ and ► buttons to modify the settings, activate and deactivate the functions.
Note: When the icon
submenu or activate the function.
4. Press the LCD-MENU or DVD SETUP/EXIT buttons to go back to the previous step or exit the
configuration menu.
Note:
• Your settings will be automatically saved when you leave the configuration menu.
• After 10 seconds of inactivity, the device will automatically exit the configuration menu.
• The available settings depend on the selected source.
30
Voice

LCD MENU

is displayed near a function, press ► or ENTER to access the corresponding
Music Theater